otsdaq_prepmodernization
v2_05_02_indev
|
Libraries | |
IEEE |
Use Clauses | |
ieee.std_logic_1164.all | |
ieee.numeric_std.all |
Ports | |
reset | in STD_LOGIC |
user_busy | out STD_LOGIC |
GMII_RX_CLK | in STD_LOGIC |
GMII_RX_DV | in STD_LOGIC |
GMII_RXD | in STD_LOGIC_VECTOR ( 7 downto 0 ) |
GMII_RX_ER | in STD_LOGIC |
GMII_TX_EN | out STD_LOGIC |
GMII_TXD | out STD_LOGIC_VECTOR ( 7 downto 0 ) |
GMII_TX_ER | out STD_LOGIC |
GTX_CLK | out STD_LOGIC |
self_addr | in STD_LOGIC_VECTOR ( 31 downto 0 ) |
self_mac | in STD_LOGIC_VECTOR ( 47 downto 0 ) |
self_port | in STD_LOGIC_VECTOR ( 15 downto 0 ) |
arp_announce | in STD_LOGIC |
user_tx_dest_addr | in STD_LOGIC_VECTOR ( 31 downto 0 ) |
user_tx_dest_mac | in STD_LOGIC_VECTOR ( 47 downto 0 ) |
user_tx_dest_port | in STD_LOGIC_VECTOR ( 15 downto 0 ) |
user_rx_valid_out | out STD_LOGIC |
user_rx_data_out | out STD_LOGIC_VECTOR ( 7 downto 0 ) |
user_rx_size_out | out STD_LOGIC_VECTOR ( 10 downto 0 ) |
user_tx_enable_out | out STD_LOGIC |
user_tx_data_in | in STD_LOGIC_VECTOR ( 7 downto 0 ) |
user_tx_size_in | in STD_LOGIC_VECTOR ( 10 downto 0 ) |
user_tx_trigger | in STD_LOGIC |
crc_err | out STD_LOGIC |
crc_chk_out | out STD_LOGIC |
four_bit_mode_out | out STD_LOGIC |
udp_fwd_port | out STD_LOGIC_VECTOR ( 15 downto 0 ) |
user_rx_src_capture_for_ctrl | out STD_LOGIC |
user_rx_src_capture_for_data | out STD_LOGIC |
user_rx_src_addr | out STD_LOGIC_VECTOR ( 31 downto 0 ) |
user_rx_src_mac | out STD_LOGIC_VECTOR ( 47 downto 0 ) |
user_rx_src_port | out STD_LOGIC_VECTOR ( 15 downto 0 ) |
Definition at line 24 of file ethernet_controller_wrapper.vhd.